Company           Products           Services           Contact           Cooperation           Cogeneration

PRODUCTS


Power supplies

Other

Software support



UPS of PLURYS series


UPS of PLURYS series from 5kVA up to 10kVA are supplied with 1- and 3- phase input and 1-phase output with possibility set up voltage 220, 230, 240V.


Other parameters:
Data of important operating parameters (e.g. voltage, failures, back-up time, etc.) are screened on the display located on the front panel.

If specially ordered, it is possible to provide a remote control panel and also a manual by-pass with the UPS which enables the UPS intervention without switching off the load supply. Also it is possible to order an insulation transformer for a voltaic separation of the load supply from the mains supply.

UPS can be connected to an external battery module or external battery charger to prolong the back-up time.

Type Power Back-up time Dimensions
w x h x d
Weight
UPS [kVA] [kW] [min] [mm] [kg]
PLURYS 5 (1f/1f)
PLURYS 5 5 3,5 10 - 90 1-3x(230 x 640 x 620) 80 - 312
PLURYS 6 (1f/1f)
PLURYS 6 6 4,2 12 - 90 1-3x(230 x 640 x 620) 92 - 368
PLURYS 8 (1f/1f)*
Plurys 8 8 5,6 10 - 50 2-4x(230 x 640 x 620) 145 - 341
PLURYS 10(1f/1f)*
PLURYS 10 10 7 8 - 45 1-4x(230 x 640 x 620) 52 - 346


Type Power Baxk-up time Dimensions
w x h x d
Weight
UPS [kVA] [kW] [min] [mm] [kg]
PLURYS 6 (3f/1f)
PLURYS 6 6 4,2 12 - 90 1-3x(230 x 640 x 620) 95 - 371
PLURYS 8 (3f/1f)*
Plurys 8 8 5,6 10 - 50 1-4x(230 x 640 x 620) 47 - 341
PLURYS 10 (3f/1f)*
Plurys 10 10 7 8 - 45 1-4x(230 x 640 x 620) 52 - 346

Note:
* standard version ( back- up time 10 min.) UPS of PLURYS series from 8 kVA up to 10kVA consists of two battery modules.
Back-up time depends on used battery modules. If you require longer back-up time, please, contact producer.

Homepage
© Elteco 2004